To develop a way to spot check alignment problems. Make sure your shoulders are properly aligned. Your shoulders are the most important element because your swing path will follow the alignment of your shoulders at impact. Subtle compensations can creep into your swing if you are not properly aligned. Without help even the best golfers can have trouble recognizing this. You must constantly check your alignment to be consistent. Poor alignment is a major problem for golfers who slice. Align the clubface squarely then align your body. Check the position of the ball by using alignment clubs also. Most golfers think they play the ball further back than they really do.
To start your practice sessions properly aligned. Don.t assume you are lined up correctly. Remember practice makes permanent, so make sure you are starting off positioned correctly. Learn the square stance first. Later, as the need arises, you can experiment with other stances.
To double check your target line. If you don.t accurately know your target line, you cannot easily tell if you are making swing path errors. Before each shot approach the ball from behind and pick your target line. Then when taking your stance align yourself toward your target. Better players align themselves much more consistently than poor players. Hitting balls without aiming at a target is an invitation for swing problems. Tape, clubs on the ground, or and "practice partners" are all good ways to check alignment. Learn to identify the different between a poor shot and an error in alignment.
Do's and Don'ts
Don't leave the club between your feet longer than needed to check proper ball position. Many good players leave one club on the ground parallel to the target line whenever they hit practice balls. This "drill" is a good way to begin every practice session.
Showing posts with label Golf Grip. Show all posts
Showing posts with label Golf Grip. Show all posts
Monday, August 31, 2009
Wednesday, August 19, 2009
Coil For More Consistency By Matt Holin, Teaching Professional
The primary benefit of having the proper amount of hip bend in your swing is that it allows your body to coil effectively to create an efficient source of power.
While testing the PGA and Champions Tour players' golf swings, we discovered that a proper coil of the body is a simple way of achieving a repeatable power source. Average touring professionals turn their shoulders 41 degrees further on the back swing than their hips. This coiling action allows for a proper weight shift to occur, while maintaining a solid base, by keeping the hip motion in the golf swing to a minimum.
Typically we see most amateurs have two flaws with the coiling action in the golf swing. The first flaw is when a student's hips and shoulders turn together to create a long backswing with no coiling action. This swing usually produces action that takes the club significantly past parallel and is very difficult to repeat from swing to swing. The second flaw is the opposite. A student will not rotate their shoulders at all, leading to a lifting of the club with their arms. This invariably produces a reverse weight shift, which robs power and produces inconsistencies.
Test Your Coil
1. A simple way to test your coil is to set up in proper posture.
2. Now place a golf club in front of your shoulders.
3. Your goal is to turn the club across your shoulders over to your right foot. When you have done that you have created a sufficiently long turn with the shoulders.
4. Now comes the tricky part. Look and see where your belt buckle is facing.
If it is facing inside your right toe, you have a fantastic coil and are ready to hit long consistent golf shots. If your belt buckle is facing right of that point, your hips have rotated too far and you are losing power in you golf swing. By improving your coil you can maximize the efficiency of your swing and improve your ball striking.
While testing the PGA and Champions Tour players' golf swings, we discovered that a proper coil of the body is a simple way of achieving a repeatable power source. Average touring professionals turn their shoulders 41 degrees further on the back swing than their hips. This coiling action allows for a proper weight shift to occur, while maintaining a solid base, by keeping the hip motion in the golf swing to a minimum.
Typically we see most amateurs have two flaws with the coiling action in the golf swing. The first flaw is when a student's hips and shoulders turn together to create a long backswing with no coiling action. This swing usually produces action that takes the club significantly past parallel and is very difficult to repeat from swing to swing. The second flaw is the opposite. A student will not rotate their shoulders at all, leading to a lifting of the club with their arms. This invariably produces a reverse weight shift, which robs power and produces inconsistencies.
Test Your Coil
1. A simple way to test your coil is to set up in proper posture.
2. Now place a golf club in front of your shoulders.
3. Your goal is to turn the club across your shoulders over to your right foot. When you have done that you have created a sufficiently long turn with the shoulders.
4. Now comes the tricky part. Look and see where your belt buckle is facing.
If it is facing inside your right toe, you have a fantastic coil and are ready to hit long consistent golf shots. If your belt buckle is facing right of that point, your hips have rotated too far and you are losing power in you golf swing. By improving your coil you can maximize the efficiency of your swing and improve your ball striking.
Monday, August 10, 2009
Short Game Golf Tips - Chipping Tips, Practice Tips
Todays message starts your series of drills covering the area of chipping and pitching and focuses on a technique called the Under Reach Technique which was invented by short game expert Paul Runyan. I had never heard of this before and asked a pro at my local course whether he knew of it. He said that it is a drill that he uses all the time to help higher handicappers get some consistency in their chipping.
So I asked him to show me how it worked. It only cost me a couple of beers, well maybe four or five. It really is a simple and effective way of stopping you duff those short little chip shots which most of us either hit fat or thin. This drill is entitled...... The Under Reach Technique by Paul Runyon Regardless of ability , we all have good days and bad days when it comes to hitting greens in regulation. On the bad days, it's important that you have the method and means to get up and down with some regularity; otherwise, your scores will be much higher than you'd like. A Pro I asked about the drill said: This is where a strong mental thought should be used. In getting up and down, the getting up part is the most important. If you can chip the ball ON THE GREEN and relatively close, you won't have to worry about making those tough 20 to 30 footers.
Unfortunately, most high handicap players short games aren't up to snuff (well mine certainly wasn't). If there's one mistake that I made on a regular basis that caused me and my overall score the most damage, it was hitting the chip fat and not even Getting Up. I've learned this great technique to ensure that you never hit a short shot short again (well most of the time), and you can use it too. This method is a method which was used by short-game master Paul Runyan, he called this technique "under-reaching the ball." It's quite interesting and easy to apply in the short game. The biggest problem amateur golfers like me and you have when it comes to the short game is chunked shots.
To help prevent fat chips, try the under-reach technique. Begin by assuming your address position, with your arms hanging to their natural length. Choke down on the club about an inch (i go even shorter, about two inches), and hover the club just off the ground as you get ready to execute the shot. The combination of choking the grip and hovering the club will help you guard against hitting the shot fat.
When you finally make a swing, simply concentrate on contacting the bottom half of the ball. How to set up for the Under Reach Start with the posture. With the ball positioned in the middle of your stance, assume your normal setup and allow your arms to fall downward in front of you as far as they can. Allow gravity to stretch them fully. Then, take your standard grip on the club. As you grip the club, allow the sole to rest gently on the ground. Now, grip down on the club approximately one inch. If you choke down appropriately, the clubhead should hover just above the grass. (Try this out on the carpet at home, it will give you the right visual of how the club will hover off of the ground)This is the under-reach to which Paul Runyan referred. With the club just above ground level, the leading edge of the club is now located at the bottom of the golf ball. Note: The longer the grass from which you're playing, the more effective this technique becomes. In long grass, the ball will often sit up, making it easy to slide the clubhead underneath the ball. By hovering the club, you'll ensure crisper, squarer contact.
Why does it Work? For you to get the ball up in the air, the leading edge of the club must pass under the equator (the middle of the ball). In this new address position, the leading edge of the club is well below the middle of the ball, making a square strike easier to attain. The only way to hit the shot fat is by changing your posture as you swing the club. If you remain in the same posture you established at address and maintain your spine angle, you'll strike the ball squarely every time and Not Leave it Short. The only thing that might cause you a problem with this technique is keeping your posture. A good way to ensure that you keep your posture intact is to keep your chin up and stand tall as you execute your swing. This will also better allow your arms to swing freely and stretch out through the shot, so the club can reach the bottom of the golf ball.
The Golf Swing Golf in many ways is a game of opposites. For example, in order to make the ball go up, you have to hit down on it. Most players try to "lift" the ball in the air instead of striking downward and pinching the ball against the turf. These players should look at the basic design of a golf club, which typically places the hands slightly ahead of the leading edge of the clubface. This is done in order to help create the perfect impact position, one defined by the hands leading the club into the back of the golf ball. In so doing, the loft that's built into the club lifts the ball into the air, not the hands. The under-reach technique helps you to take advantage of just that.
Of course, the club can't do all the work, you have to put it into motion. Now, before you think about swinging the club, think about the pace. The right pace is the true key to short shots around the green. You don't see a Tour pro strike a chip with a herky-jerky motion. Most of the top short-game players allow the club to move in response to gravity, not to muscular effort. When golfers overuse their muscles, their grip on the club usually tightens, which can affect the position of the clubface at the all-important moment of impact. When trying to gain a nice free flowing rhythmical short-game swing, why not try the following two drills. They're easy to execute and do the best job of ingraining the sensation of the club responding to gravity while the body and hands function solely to support the clubhead.
Give this pair of drills a go the next time you practice your chipping technique. Coupled with the under-reach technique, I'm sure you'll keep those chunked chips at bay and give yourself more opportunities to get up and down and save par. It's absolutely critical that you slide the leading edge of the club under the ball when executing short-game shots. The only way to effectively slide the club under the golf ball is to give your arms plenty of room to swing (Under Reach). To do this, you must stand tall and keep your head up; otherwise, it's easy to skull the shot over the green or chunk it short of the target. Brush The Grass Drill Make three continuous practice swings back and through while eyeing your target. Making rehearsal swings while looking at the target will help you instinctively determine the length and pace necessary to hit the shot the appropriate distance.
Then, step up to the ball and duplicate your rehearsal swing over the golf ball. Finally, hit the chip. I think you'll be surprised how well you'll strike the ball and how much more fluid your swing will feel. The Name Game Think of the name of a star or celebrity who has two syllables in the first name and two syllables in the last name. (i.e., John-ny Mill-er, Fred-dy Coup-les, By-ron Nel-son). As you make your swing, say the first name on the backswing and the last name on the forwardswing. Since the first and last names feature the same number of syllables, using them in time with your swing will ensure that the length and pace of your backswing matches the length and pace of your forward swing, a critical element of sound chipping. In the short game, too much speed and not enough rhythm can be even more detrimental. Shots around the green are all about distance control and touch. A good, relaxed tempo is crucial to achieving the desired results.
Good luck with your short-game practice. With a little work, you'll soon strike those scary chips with more confidence and freedom and with better results.
So I asked him to show me how it worked. It only cost me a couple of beers, well maybe four or five. It really is a simple and effective way of stopping you duff those short little chip shots which most of us either hit fat or thin. This drill is entitled...... The Under Reach Technique by Paul Runyon Regardless of ability , we all have good days and bad days when it comes to hitting greens in regulation. On the bad days, it's important that you have the method and means to get up and down with some regularity; otherwise, your scores will be much higher than you'd like. A Pro I asked about the drill said: This is where a strong mental thought should be used. In getting up and down, the getting up part is the most important. If you can chip the ball ON THE GREEN and relatively close, you won't have to worry about making those tough 20 to 30 footers.
Unfortunately, most high handicap players short games aren't up to snuff (well mine certainly wasn't). If there's one mistake that I made on a regular basis that caused me and my overall score the most damage, it was hitting the chip fat and not even Getting Up. I've learned this great technique to ensure that you never hit a short shot short again (well most of the time), and you can use it too. This method is a method which was used by short-game master Paul Runyan, he called this technique "under-reaching the ball." It's quite interesting and easy to apply in the short game. The biggest problem amateur golfers like me and you have when it comes to the short game is chunked shots.
To help prevent fat chips, try the under-reach technique. Begin by assuming your address position, with your arms hanging to their natural length. Choke down on the club about an inch (i go even shorter, about two inches), and hover the club just off the ground as you get ready to execute the shot. The combination of choking the grip and hovering the club will help you guard against hitting the shot fat.
When you finally make a swing, simply concentrate on contacting the bottom half of the ball. How to set up for the Under Reach Start with the posture. With the ball positioned in the middle of your stance, assume your normal setup and allow your arms to fall downward in front of you as far as they can. Allow gravity to stretch them fully. Then, take your standard grip on the club. As you grip the club, allow the sole to rest gently on the ground. Now, grip down on the club approximately one inch. If you choke down appropriately, the clubhead should hover just above the grass. (Try this out on the carpet at home, it will give you the right visual of how the club will hover off of the ground)This is the under-reach to which Paul Runyan referred. With the club just above ground level, the leading edge of the club is now located at the bottom of the golf ball. Note: The longer the grass from which you're playing, the more effective this technique becomes. In long grass, the ball will often sit up, making it easy to slide the clubhead underneath the ball. By hovering the club, you'll ensure crisper, squarer contact.
Why does it Work? For you to get the ball up in the air, the leading edge of the club must pass under the equator (the middle of the ball). In this new address position, the leading edge of the club is well below the middle of the ball, making a square strike easier to attain. The only way to hit the shot fat is by changing your posture as you swing the club. If you remain in the same posture you established at address and maintain your spine angle, you'll strike the ball squarely every time and Not Leave it Short. The only thing that might cause you a problem with this technique is keeping your posture. A good way to ensure that you keep your posture intact is to keep your chin up and stand tall as you execute your swing. This will also better allow your arms to swing freely and stretch out through the shot, so the club can reach the bottom of the golf ball.
The Golf Swing Golf in many ways is a game of opposites. For example, in order to make the ball go up, you have to hit down on it. Most players try to "lift" the ball in the air instead of striking downward and pinching the ball against the turf. These players should look at the basic design of a golf club, which typically places the hands slightly ahead of the leading edge of the clubface. This is done in order to help create the perfect impact position, one defined by the hands leading the club into the back of the golf ball. In so doing, the loft that's built into the club lifts the ball into the air, not the hands. The under-reach technique helps you to take advantage of just that.
Of course, the club can't do all the work, you have to put it into motion. Now, before you think about swinging the club, think about the pace. The right pace is the true key to short shots around the green. You don't see a Tour pro strike a chip with a herky-jerky motion. Most of the top short-game players allow the club to move in response to gravity, not to muscular effort. When golfers overuse their muscles, their grip on the club usually tightens, which can affect the position of the clubface at the all-important moment of impact. When trying to gain a nice free flowing rhythmical short-game swing, why not try the following two drills. They're easy to execute and do the best job of ingraining the sensation of the club responding to gravity while the body and hands function solely to support the clubhead.
Give this pair of drills a go the next time you practice your chipping technique. Coupled with the under-reach technique, I'm sure you'll keep those chunked chips at bay and give yourself more opportunities to get up and down and save par. It's absolutely critical that you slide the leading edge of the club under the ball when executing short-game shots. The only way to effectively slide the club under the golf ball is to give your arms plenty of room to swing (Under Reach). To do this, you must stand tall and keep your head up; otherwise, it's easy to skull the shot over the green or chunk it short of the target. Brush The Grass Drill Make three continuous practice swings back and through while eyeing your target. Making rehearsal swings while looking at the target will help you instinctively determine the length and pace necessary to hit the shot the appropriate distance.
Then, step up to the ball and duplicate your rehearsal swing over the golf ball. Finally, hit the chip. I think you'll be surprised how well you'll strike the ball and how much more fluid your swing will feel. The Name Game Think of the name of a star or celebrity who has two syllables in the first name and two syllables in the last name. (i.e., John-ny Mill-er, Fred-dy Coup-les, By-ron Nel-son). As you make your swing, say the first name on the backswing and the last name on the forwardswing. Since the first and last names feature the same number of syllables, using them in time with your swing will ensure that the length and pace of your backswing matches the length and pace of your forward swing, a critical element of sound chipping. In the short game, too much speed and not enough rhythm can be even more detrimental. Shots around the green are all about distance control and touch. A good, relaxed tempo is crucial to achieving the desired results.
Good luck with your short-game practice. With a little work, you'll soon strike those scary chips with more confidence and freedom and with better results.
Wednesday, July 22, 2009
Seven Technology Factors to Improve Your Golf Game
We are all looking for that little extra something that is going to make this wonderful game a little bit more forgiving. Here are a few suggestions:
Technology Factor #1 . Shorter Driver Length and More Loft Today.s drivers that are sold .off the rack. are made in lofts from 8-11 degrees, and in lengths of 45. to 45 1/2.. However, only 10% of all golfers have the required swing mechanics and athletic ability to warrant playing such equipment. If you swing over the top or have an inconsistent tempo, and your wrist to floor measurement is less than 40., then a 45. driver is probably too long for you. If you.re swing speed is less than 95 mph and you are using a driver with a loft of 9-11 degrees, then you are probably not maximizing your distance off the tee. If you hit a 3 wood better and more consistent than a driver, you can definitely take advantage of higher lofted drivers.
Technology Factor #2 . Closed Wood Face Angle Wood face angle is the BEST equipment correction device for driver accuracy. Face angle is the direction the face points when the head is placed in playing position or soled. It is a design factor that helps correct minor swing path faults or the inability of the golfer to square the clubface at impact. How many golfers do you think have that problem? Most golfers with driver problems either push or slice the ball off the tee. Yet, when you purchase .off the rack. drivers you have very little opportunity to alter the face angle. They just don.t offer that as an option. Most drivers will only have a closed face angle of 1 degree. A face angle with a 2-4 degree closed face angle will cut down a slice from 5-15 yards.
Technology Factor #3 . Set Make-Up Today.s 7 iron has the same loft as a 5 iron of 15 years ago. Ever wonder why it is so difficult to hit today.s 3 and 4 irons? With today.s stronger lofted long irons, many golfers are going to higher lofted woods or hybrids. Which one is best for you? That depends. If you are currently having success with higher lofted woods, then staying with woods makes perfect sense. However, if you are not consistent with the fairway woods, then the shorter lengths of the .hybrid. clubs may make you more consistent. Each option has its pros and cons. The lower and deeper center of gravity of the wood heads will tend to hit the ball higher and are easier to hit. But the shorter lengths of the hybrids should be easier to hit on center and with more control. Either way it is probably time to get rid of your 3 and 4 irons and take a serious look at higher lofted fairway woods or hybrids.
Technology Factor #4 . Use the Most Flexible Shaft You Can Control. By using a more flexible shaft, you will probably hit the ball a little higher, the shot will feel a little bit more solid, and the face might close a little more at impact. These are all things that will allow you to score better. By using a stiffer shaft you will probably hit the ball a little lower and with less distance, and the impact will be slightly harsher while the clubface may remain slightly open. Therefore, consider dropping down a flex and you might just be rewarded with a tighter shot dispersion and lower scores.
Technology Factor #5 . Use Cavity Backed Irons Cavity backed irons truly are more forgiving on off center hits. You have probably heard this before, but take a cavity-backed iron and muscle-backed iron to the course and take a 10 shots with each and plot the results (when the greens keeper is not around). Plotting these shots will show you which type of iron performs best for you. I.m sure you will see better results with the cavity-backed iron.
Technology Factor #6 . Go With a Wider Sole on the Sand Wedge If you tend to leave the ball in the sand from digging too deep under the ball, look for a sand wedge with a much wider (thicker) sole than on your current sand wedge. Also, if you tend to have a very steep downward swing plane, look for a wide sole angle and more bounce to get out of the sand more consistently. Sole angle will allow the club head to create lift as it travels through the sand to get the ball out. Bounce allows the leading edge of the head to glide through the sand because the trailing edge is actually lower than the leading edge. Having a wider sole angel and more bounce together creates favorable conditions to get out of the sand consistently.
Technology Factor #7 . Add weight to your Putter . In the Grip More golfers are starting to notice a more consistent stroke with a heavier putter. But not just by adding weight to the head. I.m talking about counterbalancing your putter by adding weight to the grip end. I will be talking more about this in future articles, but many of my customers are noticing huge performance gains by adding weight to the butt end of the putter. The method is called .Balance-Certified Golf. and Custom Clubs of Frederick is one of only a few shops in the area that can perform this service
Technology Factor #1 . Shorter Driver Length and More Loft Today.s drivers that are sold .off the rack. are made in lofts from 8-11 degrees, and in lengths of 45. to 45 1/2.. However, only 10% of all golfers have the required swing mechanics and athletic ability to warrant playing such equipment. If you swing over the top or have an inconsistent tempo, and your wrist to floor measurement is less than 40., then a 45. driver is probably too long for you. If you.re swing speed is less than 95 mph and you are using a driver with a loft of 9-11 degrees, then you are probably not maximizing your distance off the tee. If you hit a 3 wood better and more consistent than a driver, you can definitely take advantage of higher lofted drivers.
Technology Factor #2 . Closed Wood Face Angle Wood face angle is the BEST equipment correction device for driver accuracy. Face angle is the direction the face points when the head is placed in playing position or soled. It is a design factor that helps correct minor swing path faults or the inability of the golfer to square the clubface at impact. How many golfers do you think have that problem? Most golfers with driver problems either push or slice the ball off the tee. Yet, when you purchase .off the rack. drivers you have very little opportunity to alter the face angle. They just don.t offer that as an option. Most drivers will only have a closed face angle of 1 degree. A face angle with a 2-4 degree closed face angle will cut down a slice from 5-15 yards.
Technology Factor #3 . Set Make-Up Today.s 7 iron has the same loft as a 5 iron of 15 years ago. Ever wonder why it is so difficult to hit today.s 3 and 4 irons? With today.s stronger lofted long irons, many golfers are going to higher lofted woods or hybrids. Which one is best for you? That depends. If you are currently having success with higher lofted woods, then staying with woods makes perfect sense. However, if you are not consistent with the fairway woods, then the shorter lengths of the .hybrid. clubs may make you more consistent. Each option has its pros and cons. The lower and deeper center of gravity of the wood heads will tend to hit the ball higher and are easier to hit. But the shorter lengths of the hybrids should be easier to hit on center and with more control. Either way it is probably time to get rid of your 3 and 4 irons and take a serious look at higher lofted fairway woods or hybrids.
Technology Factor #4 . Use the Most Flexible Shaft You Can Control. By using a more flexible shaft, you will probably hit the ball a little higher, the shot will feel a little bit more solid, and the face might close a little more at impact. These are all things that will allow you to score better. By using a stiffer shaft you will probably hit the ball a little lower and with less distance, and the impact will be slightly harsher while the clubface may remain slightly open. Therefore, consider dropping down a flex and you might just be rewarded with a tighter shot dispersion and lower scores.
Technology Factor #5 . Use Cavity Backed Irons Cavity backed irons truly are more forgiving on off center hits. You have probably heard this before, but take a cavity-backed iron and muscle-backed iron to the course and take a 10 shots with each and plot the results (when the greens keeper is not around). Plotting these shots will show you which type of iron performs best for you. I.m sure you will see better results with the cavity-backed iron.
Technology Factor #6 . Go With a Wider Sole on the Sand Wedge If you tend to leave the ball in the sand from digging too deep under the ball, look for a sand wedge with a much wider (thicker) sole than on your current sand wedge. Also, if you tend to have a very steep downward swing plane, look for a wide sole angle and more bounce to get out of the sand more consistently. Sole angle will allow the club head to create lift as it travels through the sand to get the ball out. Bounce allows the leading edge of the head to glide through the sand because the trailing edge is actually lower than the leading edge. Having a wider sole angel and more bounce together creates favorable conditions to get out of the sand consistently.
Technology Factor #7 . Add weight to your Putter . In the Grip More golfers are starting to notice a more consistent stroke with a heavier putter. But not just by adding weight to the head. I.m talking about counterbalancing your putter by adding weight to the grip end. I will be talking more about this in future articles, but many of my customers are noticing huge performance gains by adding weight to the butt end of the putter. The method is called .Balance-Certified Golf. and Custom Clubs of Frederick is one of only a few shops in the area that can perform this service
Subscribe to:
Posts (Atom)
